It is currently Wed May 24, 2017 10:48 am

All times are UTC [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: L2TP begginer
PostPosted: Thu Sep 18, 2014 9:02 pm 

Joined: Thu Sep 18, 2014 8:50 pm
Posts: 1
Hello , Dear developers, I was looking at the openl2tp docs, I would like to know if is it possible to build a L2 tunnel over the internet to form a point (server) to multi point clients architecture.
The clients should build the tunnel to the server to provide ethernet Lan connectivity to the hosts conneced behind in a transparent way (acting as a bridge domain)

All the examples I've seen shows how to set ppp interfaces.
Is it mandatory to set an ppp interface for the tunnel? I just want to pass ip traffic within the tunnel.

So, Is there any quick implementation example between lets say two
clientes and a server?
My final goal is to deploy a LNS server in my centos with 200 tunnels with 50 host behind each tunnel. Those host behind the tunneles should not be able to connect between them.
Is that possible ?
Thanks ;
Leandro.

btw; I achieve this using GRE writting a few lines:

#CENTOS
ip tunnel add netb mode gre remote 192.168.0.254 local 192.168.0.253 ttl 255
ip link set netb up
ip addr add 10.0.1.1 dev netb
ip route add 10.0.2.0/24 dev netb

#ARCH
ip tunnel add neta mode gre remote 192.168.0.253 local 192.168.0.254 ttl 255
ip link set neta up
ip addr add 10.0.2.1 dev neta
ip route add 10.0.1.0/24 dev neta

It is not good for me since I need to define static routes.
Any advice would be wellcome;
Thanks;
Leandro.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group